Specification
1，Model：YNG145
2，Material：Metal and ABS
3，Buttons : 2345(4 Buttons)
4，Frequency : 868MHz 868.3MHz 868.35MHz
5. Code：Rolling Code
6，Type：Slide Cover (Protect Button)
7，Battery：CR2032（Include Battery)
Note:（YNG145）The 1 button is only for decoration, it does not have other functions.
(YNG145) The latest BiSecur handheld transmitter for automatic door opening, this system not only makes the transmitter safer, but also means a more reliable signal, providing a longer working distance.
1. Metal and ABS material, resistant to drop and wear
2. push cover design, perfect protection of keys
3. The new design is more popular with everyone
Compatible Models
HORMANN HSP 4 BS
HORMANN HSD 2 BS
HORMANN HSS 4 BS
HORMANN HSP4-868-BS
HORMANN HSD2-868-BS
HORMANN HSS4-868-BS
HORMANN HS 1 BS / HS 4 BS / HS 5 BS
HORMANN HSE 1 BS / HSE 2 BS / HSE 4 BS
HORMANN HS1-868-BS / HS4-868-BS / HS5-868-BS
HORMANN HSE1-868-BS / HSE2-868-BS / HSE4-868-BS
Note: Please make sure your original remote control is on the compatible list.
You can see the model number on the back of your remote control.
If you can’t judge the compatibility, please feel free to contact me.
Specification
1，Model：YNG150
2，Material：ABS
3，Buttons : 4 Buttons
4，Frequency : 868MHz 868.3MHz 868.35MHz
5, Code : Rolling Code
5，Type：Normal button, no protective button slide
6，Battery：CR2032（Include Battery)
How to clone？
（ 1） Press and hold the button of the new remote, you want to store the code of the original remote, press and hold it, press any other button 3 times until the LED red light is on for 10s, release all buttons.
（2） Place the original remote control on the left side of the new remote control as close as possible.
（3）Press the button of the original remote control, you have to copy the code, until the LED flashes red and blue alternately, check whether the LED of the new remote is flashing blue, if not, try to get as close to the original remote as possible.
（ 4） When the blue light of the new remote control flashes quickly, the learning process is over, release all buttons.
（5） Please perform the same procedure for the remaining buttons.
Reset Method
Each button of remote control is assigned to a new radio code by means of the following steps.
(1)Removing the battery for 10s
(2)Pressing one button of remote control and keep it pressed >
(3)lnserting the battery, The LED slowly flashes in blue for 4s, The LED flashes quickly in blue for 2s, The LED is illuminated blue for a long time
(4)Releasing the button of remote, all radio codes are newly assigned. D Note: If the button of remote is released prematurely, no new radio codes will be assigned.
SETTING REMOTE WITH FIXED CODE 868MHz
If keep pressing button of remote after the step of remote reset immediately, the fixed code with 868Mhz will be activated. The LED slowly flashes in red for 4s The LED flashes quickly in red for 2s The LED is illuminated red for a long time
All radio codes are newly assigned. D Note: If the button of remote is released prematurely, the BiSecur radio code will remain active
Include
Remote Control
English Manual
Include Battery
Keychain
